🔬 Laboratory · 7 min
Collecting specimens safely and correctly
The best analyser in the world cannot fix a sample taken from the wrong patient, put in the wrong tube or labelled wrongly. Most lab errors happen before the test even starts, so careful collection is where you do the most good.
Before you collect
- Read the requisition (request form). Check the patient's name, age or date of birth, sex, the tests requested, the ward or clinician, and the date and time.
- Identify the patient actively. Ask them to say their full name and compare it with the form and the wristband or card. Do not say the name first and wait for a nod. For a child or an unconscious patient, check with the caregiver and the wristband.
- Choose the right tube or container for each test, using your laboratory's list. The additive inside the tube matters. Never top up one tube from another.
- Clean your hands, put on gloves and prepare the site.
While you collect
Tubes with different additives can pass traces to the next tube. That is why labs use an order of draw. In general terms, blood culture bottles come first because they must stay sterile, then the other tubes in the order written in your laboratory's procedure. Follow that written order every time.
- Let the skin disinfectant dry before the needle goes in.
- Do not pull the syringe plunger hard and do not force blood through a small needle. Do not shake tubes. Mix additive tubes by gentle turning, as the tube instructions say. These habits avoid hemolysis, which damages red cells and spoils many results.
- Never collect from an arm that has an infusion running above the site. The drip fluid can contaminate the sample.
Label at the bedside
Label every tube in front of the patient, straight after collection. Write the full name, ID number, date and time, and your initials. Never label tubes in advance, and never label later "from memory".
Sources: WHO: Guidelines on drawing blood: best practices in phlebotomy (2010) · CLSI: standards for collection of diagnostic venous blood specimens (current edition) · WHO: Laboratory quality management system handbook (2011)
Quick check
For licensed professionals and students. Educational information only: always follow current national guidelines (EFDA, Ministry of Health), the product label and your facility’s procedures.
